LuminaMist™

LuminaMist™ is produced by bonding two sheets of glass together with a translucent interlayer to make a Grade A laminated safety glass with a white appearance for obscuring vision and diffusing light.

  • Safety
  • Privacy
Features
Noise Control LuminaMist™ provides good noise dampening over the same thickness of float glass. By incorporating LuminaMist™ into an insulating glass unit, excellent noise attenuation can be achieved.
Privacy With a frosted appearance made by bonding two or more sheets of glass together with a PVB interlayer, the result is a durable glazing material that can be used for a variety of applications.
Safety & Security LuminaMist™ is a grade A safety glass.
Range of Tones Colour options are available within the LuminaMist™ range.
UV Protection The PVB interlayer used in LuminaMist™ eliminates 99% of ultraviolet radiation.
Product Range

* The maximum sheet size is a manufacturing size and may be in excess of the safe glazing sizes set out in Australian standards.
** Image is for visual indication only and colour may vary depending on your screen.

Applications

Internal

  • Doors
  • Frameless Glazing
  • Partitions

External

  • Doors
  • Roof Glazing
  • Frameless Glazing
Downloads
Technical Information
Performance Data
Product Name Nominal Thickness Visible Solar UV Trans. U-Value SHGC Shading Co. Weight m²
Trans. Refl. Out Refl. In Trans. Refl.
LuminaMist™ Clear 6.38 67 7 7 56 6 <1 5.7 0.68 0.78 15.4
LuminaMist™ Clear 8.38 66 7 7 55 6 <1 5.7 0.67 0.77 20.4
LuminaMist™ Clear 10.38 65 7 7 51 6 <1 5.6 0.65 0.74 25.4
LuminaMist™ Clear 12.38 65 7 7 50 6 <1 5.6 0.64 0.74 30.4
LuminaMist™ SuperClear 10.38 69 7 7 65 7 <1 5.6 0.74 0.85 25.4
LuminaMist™ SuperClear 12.38 69 7 7 64 7 <1 5.6 0.73 0.84 30.4
LuminaMist™ Grey 6.76 34 5 5 36 5 <1 5.6 0.55 0.63 15.8
All performance data is determined using LBL Windows 7.8 software. NFRC 100-2010 conditions have been used.
Product Name Nominal Thickness Visible Solar UV Trans. U-Value SHGC Shading Co. Weight m²
Trans. Refl. Out Refl. In Trans. Refl. Air Argon
LuminaMist™ Clear + QFloat™ Clear 6.38+12+6 59 10 13 45 8 <1 2.7 2.5 0.56 0.64 30.4
LuminaMist™ Clear + QFloat™ Clear 8.38+12+6 59 10 13 47 9 <1 2.7 2.5 0.55 0.63 35.4
LuminaMist™ Clear + QFloat™ Clear 10.38+12+6 58 10 13 41 8 <1 2.6 2.5 0.52 0.6 40.4
LuminaMist™ Clear + EnergyTech™ Clear (#3) 6.38+12+6 55 12 15 38 10 <1 1.9 1.6 0.51 0.59 30.4
LuminaMist™ Clear + EnergyTech™ Clear (#3) 8.38+12+6 54 12 15 38 9 <1 1.9 1.6 0.51 0.58 35.4
LuminaMist™ Clear + EnergyTech™ Clear (#3) 10.38+12+6 54 11 15 35 9 <1 1.8 1.6 0.48 0.55 40.4
LuminaMist™ SuperClear + QFloat™ SuperClear 10.38+12+6 63 11 14 58 10 <1 2.6 2.5 0.64 0.74 40.4
LuminaMist™ Grey + QFloat™ Clear 6.76+12+6 30 6 12 28 6 <1 2.7 2.5 0.42 0.48 30.8
LuminaMist™ Grey + EnergyTech™ Clear (#3) 6.76+12+6 28 6 14 24 7 <1 1.9 1.6 0.37 0.42 30.8
All performance data is determined using LBL Windows 7.8 software. NFRC 100-2010 conditions have been used.
Considerations

Thermal Risk
Always assess your chosen product for thermal risk prior to specifying.

Glass Processing
Further processing is required for frameless glazing.

Installation
Exposed edges should be protected from moisture ingress.

How to Specify

Available colours and thicknesses:

  • Clear 6.38, 8.38, 10.38 & 12.38mm
  • SuperClear 10.38 & 12.38mm
  • Grey 6.76mm

Glass Thicknesses and colours available:

  • Translucent 6.38, 8.38, 10.38 & 12.38mm
  • Grey 6.76 & 10.76mm
  • SuperClear 10.38 & 12.38mm
    Select from: Laminated or Heat Strengthened laminated

*If unsure, select in compliance with AS1288–2021 or manufacturers recommendation. *

  • The glass shall comply with the following performance criteria:
  • U value
  • Solar Heat Gain Coefficient (SHGC)
  • Visible Light Transmission %
  • Glass Only Values
  • Total window

Heat Strengthening

All glass which requires extra strength and thermal resistance will be heat strengthened. Heat strengthening increases the strength of annealed glass; however, it is not a substitute for toughened glass.

In the event of fracturing heat strengthened glass will crack and tends to remain in glazed position.

Toned Glass
Toned glass absorbs a proportion of solar radiation and may require a thermal assessment depending on application.


All glass is to be selected and installed in accordance but not exclusively with the following Australian and/or New Zealand Standards

  • AS 1288 Glass in Buildings Selection and Installation
  • AS 1170 Minimum Wind Loads on Structures
  • AS/NZ 2208 Safety Glazing Materials in Buildings
  • AS/NZ 4666 Insulating Glass Units
  • AS/NZ 4667 Quality Requirements for cut-to-size and Processed Glass 

Oceania Glass makes and distributes glass. Oceania Glass does not process glass nor produce Insulated Glass Units. Processing of glass and production of Insulated Glass Units is undertaken by independent processors. Speak with your nominated glass processors to understand their processing capability.